python利用opencv保存、播放视频

代码已上传至：https://gitee.com/tqbx/python-opencv/tree/master/Getting_started_videos

目标

学习读取视频，播放视频，保存视频。学习从相机中捕捉帧并展示。学习cv2.VideoCapture()，cv2.VideoWriter()的使用

从相机中捕捉视频

通过自带摄像头捕捉视频，并将其转化为灰度视频显示出来。

基本步骤如下：

1.首先创建一个VideoCapture对象，它的参数包含两种：

设备索引，指定摄像机的编号。 视频文件的名称。

2.逐帧捕捉。

3.释放捕捉物。

import numpy as npimport cv2 as cvcap = cv.VideoCapture(0)if not cap.isOpened(): print('Cannot open camera') exit()while True: # Capture frame-by-frame ret, frame = cap.read() # if frame is read correctly ret is True if not ret: print('Can’t receive frame (stream end?). Exiting ...') break # Our operations on the frame come here gray = cv.cvtColor(frame, cv.COLOR_BGR2GRAY) # Display the resulting frame cv.imshow(’frame’, gray) if cv.waitKey(1) == ord(’q’): break# When everything done, release the capturecap.release()cv.destroyAllWindows()

其他：

cap.read()返回布尔值，如果frame读取正确，为True，可以通过这个值判断视频是否已经结束。 有时，cap可能会初始化捕获失败，可以通过cap.isOpened()来检查其是否被初始化，如果为True那是最好，如果不是，可以使用cap.open()来尝试打开它。 当然，你可以使用cap.get(propId)的方式获取视频的一些属性，如帧的宽度，帧的高度，帧速等。propId是0-18的数字，每个数字代表一个属性，对应关系见底部附录。 既然可以获取，当然也可以尝试设置，假设想要设置帧的宽度和高度为320和240：cap.set(3,320), cap.set(4,240)。

从文件中播放视频

代码和从相机中捕获视频基本相同，不同之处在于传入VideoCapture的参数，此时传入视频文件的名称。

在显示每一帧的时候，可以使用cv2.waitKey()设置适当的时间，如果值很小，视频将会很快。正常情况下，25ms就ok。

import numpy as npimport cv2cap = cv2.VideoCapture(’vtest.avi’)while(cap.isOpened()): ret, frame = cap.read() gray = cv2.cvtColor(frame, cv2.COLOR_BGR2GRAY) cv2.imshow(’frame’,gray) if cv2.waitKey(1) & 0xFF == ord(’q’): breakcap.release()cv2.destroyAllWindows()

保存视频

1.创建一个VideoWriter 对象，指定如下参数：

输出的文件名，如output.avi。 FourCC code。 每秒的帧数fps。 帧的size。

2.FourCC code传递有两种方式：

fourcc = cv2.VideoWriter_fourcc(*’XVID’) fourcc = cv2.VideoWriter_fourcc(’X’,’V’,’I’,’D’)

3.FourCC是一个用于指定视频编解码器的4字节代码。

In Fedora: DIVX, XVID, MJPG, X264, WMV1, WMV2. (XVID is more preferable. MJPG results in high size video. X264 gives very small size video) In Windows: DIVX (More to be tested and added) In OSX : (I don’t have access to OSX. Can some one fill this?)

import numpy as npimport cv2cap = cv2.VideoCapture(0)# Define the codec and create VideoWriter objectfourcc = cv2.VideoWriter_fourcc(*’XVID’)out = cv2.VideoWriter(’output.avi’,fourcc, 20.0, (640,480))while(cap.isOpened()): ret, frame = cap.read() if ret==True: frame = cv2.flip(frame,0) # write the flipped frame out.write(frame) cv2.imshow(’frame’,frame) if cv2.waitKey(1) & 0xFF == ord(’q’): break else: break# Release everything if job is finishedcap.release()out.release()cv2.destroyAllWindows()

附录

CV_CAP_PROP_POS_MSEC Current position of the video file in milliseconds or video capture timestamp. CV_CAP_PROP_POS_FRAMES 0-based index of the frame to be decoded/captured next. CV_CAP_PROP_POS_AVI_RATIO Relative position of the video file: 0 - start of the film, 1 - end of the film. CV_CAP_PROP_FRAME_WIDTH Width of the frames in the video stream. CV_CAP_PROP_FRAME_HEIGHT Height of the frames in the video stream. CV_CAP_PROP_FPS Frame rate. CV_CAP_PROP_FOURCC 4-character code of codec. CV_CAP_PROP_FRAME_COUNT Number of frames in the video file. CV_CAP_PROP_FORMAT Format of the Mat objects returned by retrieve() . CV_CAP_PROP_MODE Backend-specific value indicating the current capture mode. CV_CAP_PROP_BRIGHTNESS Brightness of the image (only for cameras). CV_CAP_PROP_CONTRAST Contrast of the image (only for cameras). CV_CAP_PROP_SATURATION Saturation of the image (only for cameras). CV_CAP_PROP_HUE Hue of the image (only for cameras). CV_CAP_PROP_GAIN Gain of the image (only for cameras). CV_CAP_PROP_EXPOSURE Exposure (only for cameras). CV_CAP_PROP_CONVERT_RGB Boolean flags indicating whether images should be converted to RGB. CV_CAP_PROP_WHITE_BALANCE_U The U value of the whitebalance setting (note: only supported by DC1394 v 2.x backend currently) CV_CAP_PROP_WHITE_BALANCE_V The V value of the whitebalance setting (note: only supported by DC1394 v 2.x backend currently) CV_CAP_PROP_RECTIFICATION Rectification flag for stereo cameras (note: only supported by DC1394 v 2.x backend currently) CV_CAP_PROP_ISO_SPEED The ISO speed of the camera (note: only supported by DC1394 v 2.x backend currently) CV_CAP_PROP_BUFFERSIZE Amount of frames stored in internal buffer memory (note: only supported by DC1394 v 2.x backend currently)

参考阅读

Getting Started with Videos

作者：天乔巴夏丶出处：https://www.cnblogs.com/summerday152/本文已收录至Gitee：https://gitee.com/tqbx/JavaBlog若有兴趣，可以来参观本人的个人小站：https://www.hyhwky.com

以上就是python利用opencv保存、播放视频的详细内容，更多关于python opencv的资料请关注好吧啦网其它相关文章！